Trắc Nghiệm Mạng Máy Tính Tiếng Anh Trắc Nghiệm Mạng Máy Tính Tiếng Anh 30 câu hỏi 30 phút Mạng máy tínhBẮT ĐẦU LÀM BÀITrắc Nghiệm Mạng Máy Tính Tiếng Anh 30 câu hỏi 30 phút Mạng máy tínhPHẦN I. Câu trắc nghiệm nhiều phương án lựa chọn.Câu 1Nhận biếtQuestion 1. Which of the following is a primary function of the Presentation Layer (Layer 6) in the OSI model?A.Data format translation, encryption, and compression.B.Path determination and logical addressing for packets.C.Establishing, managing, and terminating sessions.D.Reliable end-to-end delivery and flow control. Lát kiểm tra lại Câu 2Nhận biếtQuestion 2. In the TCP/IP model, which layer is responsible for logical addressing and determining the best path for data to travel across networks?A.Application LayerB.Internet LayerC.Transport LayerD.Network Access Layer Lát kiểm tra lại Câu 3Nhận biếtQuestion 3. What is the main purpose of encapsulation in network communication?A.To convert digital signals into analog signals for transmission.B.To add protocol-specific control information at each layer.C.To select the most efficient physical path for data.D.To verify the user's identity before granting network access. Lát kiểm tra lại Câu 4Nhận biếtQuestion 4. A set of rules that governs data communication between devices is known as a:A.TopologyB.MediumC.ProtocolD.Segment Lát kiểm tra lại Câu 5Nhận biếtQuestion 5. Which statement accurately distinguishes the TCP/IP model from the OSI model?A.The OSI model is more practical and widely implemented in modern networks.B.The TCP/IP model combines the OSI's Session and Presentation layers into its Application layer.C.The TCP/IP model has seven layers, whereas the OSI model has four.D.The OSI model was developed by the US Department of Defense for the ARPANET. Lát kiểm tra lại Câu 6Nhận biếtQuestion 6. The process of a higher-level protocol data unit (PDU) being placed inside a lower-level PDU is called:A.SegmentationB.De-encapsulationC.Flow ControlD.Encapsulation Lát kiểm tra lại Câu 7Nhận biếtQuestion 7. Which layer of the OSI model is responsible for providing services directly to the user's application, such as web browsing or email?A.Transport LayerB.Application LayerC.Session LayerD.Network Layer Lát kiểm tra lại Câu 8Nhận biếtQuestion 8. A network device that operates only at the Physical Layer (Layer 1) and repeats all incoming signals to all connected ports is a:A.SwitchB.RouterC.HubD.Bridge Lát kiểm tra lại Câu 9Nhận biếtQuestion 9. What is the primary function of a MAC (Media Access Control) address?A.To logically identify a device on a global internetwork.B.To uniquely identify a network interface card (NIC) on a local network.C.To specify the application port number for a communication.D.To locate the optimal route between source and destination networks. Lát kiểm tra lại Câu 10Nhận biếtQuestion 10. A Switch operates at which layer of the OSI model?A.Layer 1 (Physical Layer)B.Layer 2 (Data Link Layer)C.Layer 3 (Network Layer)D.Layer 4 (Transport Layer) Lát kiểm tra lại Câu 11Nhận biếtQuestion 11. Which of the following is a characteristic of Unshielded Twisted Pair (UTP) cabling?A.It is a cost-effective and commonly used cable for LANs.B.It is highly resistant to electromagnetic interference (EMI).C.It uses light pulses to transmit data over long distances.D.It is primarily used for backbone connections between buildings. Lát kiểm tra lại Câu 12Nhận biếtQuestion 12. The Data Link Layer is divided into which two sublayers?A.The Session and Presentation sublayers.B.The Physical and Network sublayers.C.The Logical Link Control (LLC) and Media Access Control (MAC) sublayers.D.The TCP and UDP sublayers. Lát kiểm tra lại Câu 13Nhận biếtQuestion 13. In a CSMA/CD network, what is the first action a device takes after detecting a collision?A.It immediately retransmits the corrupted frame.B.It transmits a jam signal to alert other devices.C.It shuts down its network interface to save power.D.It sends an error report to the network router. Lát kiểm tra lại Câu 14Nhận biếtQuestion 14. A device operating at the Network Layer that forwards packets between different networks based on IP addresses is known as a:A.RepeaterB.SwitchC.RouterD.Modem Lát kiểm tra lại Câu 15Nhận biếtQuestion 15. Which of the following IP addresses belongs to Class C?A.172.16.30.5B.10.25.11.4C.224.0.0.9D.193.168.1.10 Lát kiểm tra lại Câu 16Nhận biếtQuestion 16. What is the purpose of the subnet mask in IP networking?A.To hide the IP address from unauthorized users.B.To distinguish the network portion from the host portion of an IP address.C.To translate a domain name into an IP address.D.To automatically assign an IP address to a new device on the network. Lát kiểm tra lại Câu 17Nhận biếtQuestion 17. The protocol responsible for resolving an IP address to a physical MAC address is:A.ARP (Address Resolution Protocol)B.DHCP (Dynamic Host Configuration Protocol)C.DNS (Domain Name System)D.ICMP (Internet Control Message Protocol) Lát kiểm tra lại Câu 18Nhận biếtQuestion 18. What is the loopback IP address, used for testing a machine's own network stack?A.255.255.255.255B.192.168.0.1C.127.0.0.1D.0.0.0.0 Lát kiểm tra lại Câu 19Nhận biếtQuestion 19. A routing protocol that uses "hop count" as its primary metric for path selection is:A.OSPF (Open Shortest Path First)B.BGP (Border Gateway Protocol)C.RIP (Routing Information Protocol)D.EIGRP (Enhanced Interior Gateway Routing Protocol) Lát kiểm tra lại Câu 20Nhận biếtQuestion 20. What information is contained in the header of an IP packet?A.The source and destination MAC addresses.B.The sequence number for reassembling a message.C.The port numbers for the application services.D.The source and destination IP addresses. Lát kiểm tra lại Câu 21Nhận biếtQuestion 21. What is a key difference between TCP (Transmission Control Protocol) and UDP (User Datagram Protocol)?A.TCP is connectionless, while UDP is connection-oriented.B.TCP provides reliable delivery, while UDP offers faster, best-effort delivery.C.TCP is used for DNS queries, while UDP is used for web browsing.D.TCP uses IP addresses, while UDP relies on MAC addresses for delivery. Lát kiểm tra lại Câu 22Nhận biếtQuestion 22. In the context of the Transport Layer, what is a "port"?A.A physical interface on a router or switch.B.An identifier used to distinguish between different applications running on a single host.C.A security mechanism to block unwanted traffic.D.A logical channel for a single data stream. Lát kiểm tra lại Câu 23Nhận biếtQuestion 23. The "three-way handshake" (SYN, SYN-ACK, ACK) is a process used by which protocol to establish a connection?A.IPB.UDPC.HTTPD.TCP Lát kiểm tra lại Câu 24Nhận biếtQuestion 24. The mechanism that prevents a fast sender from overwhelming a slow receiver is known as:A.Error detectionB.MultiplexingC.Flow controlD.Authentication Lát kiểm tra lại Câu 25Nhận biếtQuestion 25. Which of the following applications would be most suitable for using UDP?A.Live video streamingB.File transfer (FTP)C.Email (SMTP)D.Secure web browsing (HTTPS) Lát kiểm tra lại Câu 26Nhận biếtQuestion 26. The primary protocol used for browsing websites is:A.FTP (File Transfer Protocol)B.SMTP (Simple Mail Transfer Protocol)C.HTTP (Hypertext Transfer Protocol)D.TELNET Lát kiểm tra lại Câu 27Nhận biếtQuestion 27. The function of the Domain Name System (DNS) is to:A.Automatically assign IP configuration to hosts.B.Translate human-readable domain names into IP addresses.C.Transfer files between a client and a server.D.Manage the secure transmission of web traffic. Lát kiểm tra lại Câu 28Nhận biếtQuestion 28. Which protocol is responsible for automatically assigning an IP address, subnet mask, and default gateway to a client device?A.DNSB.ARPC.SNMPD.DHCP Lát kiểm tra lại Câu 29Nhận biếtQuestion 29. When you send an email, which protocol does your email client typically use to send the message to your mail server?A.POP3 (Post Office Protocol 3)B.IMAP (Internet Message Access Protocol)C.SMTP (Simple Mail Transfer Protocol)D.HTTP (Hypertext Transfer Protocol) Lát kiểm tra lại Câu 30Nhận biếtQuestion 30. FTP (File Transfer Protocol) is unique because it uses two separate connections between client and server. These connections are for:A.Sending and receiving data simultaneously.B.Establishing a primary and a backup link.C.Control commands and data transfer.D.Encrypted traffic and unencrypted traffic. Lát kiểm tra lại Số câu đã làm0/30|Thời gian còn lại--:--NỘP BÀI